CANADIAN, AERIAL VARIOMETER, ZA10214, FOR, WIRELESS SET No 19 MK II, 19 SET, WS19,
Move your mouse over image or click to enlarge
CANADIAN, AERIAL VARIOMETER, ZA10214, FOR, WIRELESS SET No 19 MK II, 19 SET, WS19, CANADIAN, AERIAL VARIOMETER, ZA10214, FOR, WIRELESS SET No 19 MK II, 19 SET, WS19, CANADIAN, AERIAL VARIOMETER, ZA10214, FOR, WIRELESS SET No 19 MK II, 19 SET, WS19, CANADIAN, AERIAL VARIOMETER, ZA10214, FOR, WIRELESS SET No 19 MK II, 19 SET, WS19, CANADIAN, AERIAL VARIOMETER, ZA10214, FOR, WIRELESS SET No 19 MK II, 19 SET, WS19, CANADIAN, AERIAL VARIOMETER, ZA10214, FOR, WIRELESS SET No 19 MK II, 19 SET, WS19,

CANADIAN, AERIAL VARIOMETER, ZA10214, FOR, WIRELESS SET No 19 MK II, 19 SET, WS19,

  • £74.00

Only 1 left!

CANADIAN, AERIAL VARIOMETER, ZA10214, FOR, WIRELESS SET No 19 MK II, 19 SET, WS19, 12440-PHILA-44

 

The Aerial Variometer was used to match a short rod aerial of 8 or 12 ft to 1/4 wavelength in the frequency range of the W.S. No. 19. On the "low band" (2 - 4,5 MHz), the 0 - 100 calibration is used, the two coils are switched in series and inductance had to be added; in contrast in the "high band" (4,5 - 8 MHz), the coils were switched in parallel, the inductance was reduced, the calibration 200 - 100 is used. The control can be rotated 360°, switches at the 180° positions of the control knob switch the coils in the correct operation.

Variometers must principally be of the same Mark as the Wireless Set No. 19:

Wireless Sets No. 19 Mk I Aerial Variometer: the adjustable resistor R29A had to be factory adjusted to adjust the meter reading, it is placed in the set.

Mk I variometers can only be used with W.S. No. 19 Mk I.

Wireless Sets No. 19 Mk II Aerial Variometer: the adjustable resistor R29A is placed in the variometer itself, the Mk II variometer can be used with W.S. No. 19 Mk II. A variometer Mk II can be used with W.S. No. 19 Mk III, but the R29A might have to be readjusted for correct meter readings.

A variometer Mk II can be used with W.S. 19 Mk. I, but the R29A within the set has to be short-circuited.

Wireless Sets No. 19 Mk III Aerial Variometer: the adjustable resistor R29A is placed in the variometer itself, the Mk III variometer can be used with W.S. No. 19 Mk III. A variometer Mk III can be used with W.S. No. 19 Mk II, but the R29A might have to be readjusted for correct meter readings.

A variometer Mk III can be used with W.S. 19 Mk. I, but as above mentionned, the R29A within the set has to be short-circuited.

 

 

The Wireless Sets No.19 Mk II Aerial variometers have been produced in United Kingdom and und the U.S. (contract 12440-PHILA-44).


We Also Recommend